股市里面的杠杆-股票稳赚不赔骗局-【东方资本】,股票t1操作技巧,股票做t操作,金太阳炒股软件怎么越来越不好用

技術文章

電池安全性檢測設備 -> 電池?cái)D壓試驗機

電池安全性檢測設備 -> 電池?cái)D壓試驗機


產品詳細

通過擠壓試驗檢驗電池的安全性能，進行試驗后電池應不起火，不爆炸，也是各電池廠家及研究所必不可少的檢測設備。

Battery is inspected on safety performances through compression test. Safety performance is testified only if there is no fire or explosion in test. This equipment is indispensable inspect device for battery manufactures and research institutes.

標準依據
  1. MT/T 1051-2007≤礦燈用鋰離子蓄電池-擠壓試驗≥
  2. UL 1642 安全標準《壓縮測試》
  3. UL 2054 安全標準《壓縮測試》
  4. GB/T 2900.11-1988 礦燈用鋰離子蓄電池安全性能檢驗規范《擠壓》
  5. YD 1268-2003 移動通信手持機銼電池及充電器的安全要求《耐擠壓性能》
  6. SJ/T 11169-1998 鋰電池標準《擠壓試驗》
  7. GB/T 8897.4-2002 原電池第4部分鋰電池的安全要求《擠壓》
  8. SJ/T 11170-1998 家用及商用電池安全標準《擠壓》
  9. YDB 032-2009 通信用后備式鋰離子電池組《抗擠壓》
  10. QB/T 2502—2000 鋰離子蓄電池總規范《擠壓(內部短路)試驗》
  1. MT/T 1051-2007 Compression test: Lithium-ion batteries for miner lamp;
  2. UL 1642 Compression test of Standard for Safety;
  3. UL 2054 Compression test of Standard for Safety;
  4. GB/T 2900.11-1988 Compression, safety inspection of lithium-ion batteries for miner lamp;
  5. YD 1268-2003 Compression-resistance performance, safety requirement of batteries and chargers for mobile handset;
  6. SJ/T 11169-1998 Compression test of lithium-ion battery standards;
  7. GB/T 8897.4-2002 Compression, safety requirement for lithium-ion in part 4, galvanic battery;
  8. SJ/T 11170-1998 Compression, safety standard for household and commercial batteries;
  9. YDB 032-2009 Compression resistance, lithium-ion battery for communication;
  10. QB/T 2502—2000 Compression test(internal short-circuit), general specification of lithium-ion batteries;
產品特點 Product Feature
  1. 電線外套均套有金屬防火管，有效阻止電池試驗過程著火而燃燒的現象;
  2. 裝照明燈管，在外面可清楚看清工作室內情況;
  3. 擠壓力量值250N~13KN可隨意設置，滿足不同標準要求;
  4. 裝測試孔及補風口，補風口+排氣扇會更有效將試驗廢氣及氣壓迅速排除;測試孔提供試驗者如想探測試驗空間里的溫度或氣壓而設計;
  5. 控制部分與試驗箱采用分離形式，可在1~2米處操作，起到一定的安全措施。
  1. Electrical wire is sheathed in metal fire-retard tube, to prevent ignition caused by fire in battery test.
  2. Equipped with Lighting lamp, test area is visible from outside;
  3. Compression force can be set from 250N to 13KN, as per requirement in specific standard.
  4. Equipped with test hole and tuyere; Through tuyere and fan, exhaust gas is cleared out, and pressure equalized rapidly; Through Test hole, temperature and air pressure in test area can be measured easily.
  5. Controller device is detached from test chamber; As a safety measure, the equipment is operated 1-2 meters from the test chamber.
技術參數 Technical parameler:
壓力（KN）Force (KN) 20
最大位移（mm）Max. Displacement(mm) 200、300、500
輔助功能(選配) Accessibility(optional) 電壓、溫度采集、視頻監控系統、滅火系統、安全防爆系統、煙霧過濾系統 Voltage, temperature collection, video monitoring system, fire extinguishing system, explosion protection system, smoke filter system
擠壓速度 Compression Speed 0~40mm/min (可調 adjustable)
測試空間（mm） Test Space(mm) 200x200x200mm、300x300x300mm (可按要求定制 Can customize according to requirement)
外形尺寸 External size W680xD570xH1740mm
選配標準 Option Index 電壓選擇 Voltage options 0-10V, 0-100V
溫度采集范圍 Temperature Acquisition Range 0~1200℃
電壓、溫度精度 Voltage/Temperature Accuracy ±%FS
電壓分辨率 Voltage Resolution 1mv
溫度分辨率 Temperature Resolution 0.1℃
主要技術指標 Major Technical Index 速度 Speed 0~40mm/min(可調 adjustable)
擠壓行程 Compression Stroke 0~300mm范圍內可選 Select within 0~300mm
結構 Structure 立式、臥式（可根據實際尺寸選擇）vertical, horizontal type (select according to the actual size)
試驗條件 Test Conditions 作用力大約13KN,一旦達到最大壓力即可泄壓 Applied force is approximately 13KN; when it reach the max. value, the air press can be released.
擠壓方式 Compression Method 橫向、縱向 Transverse, Longitudinal
擠壓變形量 Compression Deformation 無（如需要?jiǎng)t需另選電腦控制系統系列） Non (if needed, please select computer-control system series)
擠壓保持時間 Compression Retaining Time 0~99小時99分99秒 0-99hrs99mins99secs
驅動方式 Dive Method 液壓 Hydraulic
擠壓精度 Needling Accuracy 1%
結構 Structure 箱體 Cabinet 立式或臥式結構與控制部分分開 Vertical structure is separated from control part
通訊 Communication 無（如需要?jiǎng)t需另選電腦控制系列） Non (if needed, please select computer-control system series)
擠壓夾具 Communication 平面擠壓盤，可根據不同標準選配不同夾具 Flat compression plate, can select fixture as per specific standard.
數據采集模塊 Data Acquisition Module 獨立遠程采集隔離，多路電壓、溫度、電流采集通道、確保數據無誤（選配）Independent remote acquisition isolation; multiple-channel voltage, temperature, current acquisition channel;
通道數量標配 Equipped Channel Number 2通道、4通道、8通道，多種數據采集系統（選配）2 channels, 4 channels, 8 channels, multiple data acquisition system(optional)
攝像監控系統 Monitoring System 測試區域裝配高清攝像監控系統，并可遠程控制，具有防爆功能（選配）Test area equipped with HD monitoring system, with remote control, and explosion-proof function(optional)
標準配置 Standard Configure 擠壓主機1套，控制柜1套，擠壓盤1個 Host computer 1 set, controller cabinet 1set, compression plate 1 set
測試夾具 Test Fixture 特定制作，根據樣品實際使用條件而定Specific production, according to the actual using conditions of sample.
電源電壓 Power Supply AC 380V 50Hz 三相五線制 three phases five wires
使用環境 Operation Ambiance 0~45℃

粵公網安備 44190002003872號